{"title":"EV Controllers","description":null,"products":[{"product_id":"aem-vcu-275-universal-tube","title":"AEM VCU 275 Universal Tube","description":"\u003cp\u003eAEM's Vehicle Control Units (VCUs) are the missing link for high-performance EV street-conversion and motorsports applications. They allow the calibrator to create customized torque management strategies applicable to a wide range of EV systems and component combinations. They integrate EV systems and unify the tuning experience providing motorsports- and conversion-ready features presented in a high feature, modern and customizable interface. Be In Control with AEM EV.AEM's VCU275 is built on OEM hardware and features OEM quality strategies. Combined, these provide the highest level of reliability, and more importantly, safety for both the programmer and end-user.The VCU275 can manage up to two inverter\/motor systems, communicate with three independent CAN bus networks, and it can be used on direct-drive and indirect-drive EV setups. Please refer to the VCU275 Product Description for Setup and Tuning information, List of Supported Motors, Inverters Battery Management Systems (BMS) and other EV devices.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStartup and shutdown sequencing of high voltage components, including independent contactor control for each inverter system\u003c\/li\u003e\n\u003cli\u003eDiagnostics and fault detection including CAN message timeouts, thermal limits, contactor and inverter enable cross-checks\u003c\/li\u003e\n\u003cli\u003eDynamic real time calculated Pack Current and Vehicle Torque limits that maximize safety and optimize performance\u003c\/li\u003e\n\u003cli\u003eInput characterization including accelerator pedal, brake switch, PRND switches, and other driver\/vehicle inputs\u003c\/li\u003e\n\u003cli\u003eMotor Torque management dependent on vehicle operating states and other driver selectable modes.\u003c\/li\u003e\n\u003cli\u003eClosed-Loop motor speed regulation for indirect drive transmission applications\u003c\/li\u003e\n\u003cli\u003eCAN message translation for BMS, Inverter, PDUs and other CAN accessories\u003c\/li\u003e\n\u003cli\u003eRedundancy and arbitration features for all safety-critical inputs\u003c\/li\u003e\n\u003cli\u003eAccessory control of cooling pumps, cooling fans, lights and more\u003c\/li\u003e\n\u003cli\u003eSupports up to 2 Drive Motors and up to 1200V AEM BMS18 Systems\u003c\/li\u003e\n\u003cli\u003eFull Integration of all EV sub-systems under one controller\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":45255533232212,"sku":"AEM30-8001","price":1438.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/50b20fd591c79713653dfbf1fe6fd744L.jpg?v=1775557125"},{"product_id":"aem-ev-vcu300-programmable-vehicle-control-unit-196-pin-connector-3-can-4-motor-control","title":"AEM EV VCU300 Programmable Vehicle Control Unit 196-pin Connector 3 CAN 4-Motor Control","description":"\u003cp\u003eAEM EV Vehicle Control Units (VCUs) are the missing link for high-performance EV street-conversion and motorsports applications. They allow the calibrator to create customized torque management strategies applicable to a wide range of EV systems and component combinations. They integrate EV systems and unify the tuning experience providing motorsports- and conversion-ready features presented in a high feature, modern and customizable interface. Be In Control with AEM EV.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStartup and shutdown sequencing of high voltage components, including independent contactor control for each inverter system\u003c\/li\u003e\n\u003cli\u003eDiagnostics and fault detection including CAN message timeouts, thermal limits, contactor, and inverter enable cross-checks\u003c\/li\u003e\n\u003cli\u003eInput characterization including accelerator pedal, brake switch, PRND switches, and other driver\/vehicle inputs\u003c\/li\u003e\n\u003cli\u003eMotor torque management dependent on vehicle operating states and other driver-selectable modes\u003c\/li\u003e\n\u003cli\u003eClosed-loop motor speed regulation for indirect drive transmission applications\u003c\/li\u003e\n\u003cli\u003eCAN message translation for BMS, inverter, PDUs, and other CAN accessories\u003c\/li\u003e\n\u003cli\u003eDynamic torque limits that maximize safety and optimize performance\u003c\/li\u003e\n\u003cli\u003eRedundancy and arbitration features for all safety-critical inputs\u003c\/li\u003e\n\u003cli\u003eAccessory control of cooling pumps, cooling fans, lights and more\u003c\/li\u003e\n\u003cli\u003ePrimary functions of the AEM VCU300 include:\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":45255533789268,"sku":"AEM30-8100","price":3508.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/20684e729bc4265da41878ca60cf6f51L.jpg?v=1775557126"},{"product_id":"aem-ev-8-channel-can-driven-slave-type-power-distribution-unit-pdu","title":"AEM EV 8 Channel CAN Driven Slave Type Power Distribution Unit (PDU)","description":"\u003cp\u003eNow available for internal combustion engines! The AEM EV PDU-8 is an eight channel Power Distribution Unit expansion device that gives you the power to program and control various switched devices using our ECU\/VCUs, like high-voltage contactors, cooling fans, headlights, brake lights, turn signals, windshield wipers, fuel pumps, and more. The ability to connect up to eight PDU-8s (four on AEM Dashes, and one on Infinity ECU's) on the same CAN bus network lets installers mount the individual PDUs closer to the subsystems they are controlling, which simplifies wiring, reduces weight, and increases reliability.  This CAN-based solid-state control module eliminates the need to install fuses and relays for the switched functions that it operates. The PDU-8 can easily be controlled by other CAN based controllers that support custom CAN settings, such as Motec, Link, FuelTech, Haltech, etc. Does work with Holley EFI if using the AEM dash display for logic based control.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModule is fully sealed for installation close to switched controls, simplifying wiring and reducing weight\u003c\/li\u003e\n\u003cli\u003eFour 20A and four 10A high-side 12V outputs for activating\/deactivating various switched devices\u003c\/li\u003e\n\u003cli\u003eSmall size and lightweight (103x67x33mm\/4.05x2.70x1.5\", 190g\/6.7oz\/0.42lbs.)\u003c\/li\u003e\n\u003cli\u003eCAN-commanded PDU, no logic programming required for PDU operation\u003c\/li\u003e\n\u003cli\u003eFully-sealed, waterproof billet-aluminum enclosure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":45255534411860,"sku":"AEM30-8300","price":673.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/2ee345652ea9b12ed483c3779b254059.jpg?v=1775557126"},{"product_id":"aem-battery-management-system-master-must-be-used-with-aem-vcu-18-cell-taps","title":"AEM Battery Management System Master (MUST BE USED WITH AEM VCU - 18 Cell Taps)","description":"\u003cp\u003eThe VCU communicates with the BMS via the Master Module and all battery packs need at least one Master unit. The Satellites expand the capability of the Master by an additional 18 cells and 3 thermistors per additional Satellite connected. The Satellite Modules are connected to their Master via a high-speed serial interface (isoSPI) that allows additional units to be daisy chained together, adding as many Satellites as necessary for the battery pack configuration.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e· Contains J1772 charging specific connections needed for each battery pack\u003c\/li\u003e\n\u003cli\u003e· Contains the CAN communication interface needed for each battery pack\u003c\/li\u003e\n\u003cli\u003e· Capable of measuring up to 18 cells and 3 temperatures (thermistors)\u003c\/li\u003e\n\u003cli\u003e· Can be daisy chained to multiple satellite units\u003c\/li\u003e\n\u003cli\u003e· Weatherproof connector and housing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":45255535558740,"sku":"AEM30-8401M","price":350.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/3cf06e6b3af5b180f9853146eb12c80bL.jpg?v=1775557128"},{"product_id":"aem-battery-management-system-satellite-must-be-used-with-master-18-cell-taps","title":"AEM Battery Management System Satellite (MUST BE USED WITH MASTER - 18 Cell Taps)","description":"\u003cp\u003eThe VCU communicates with the BMS via the Master Module and all battery packs need at least one Master unit. The Satellite Modules are connected to their Master via a high-speed serial interface (isoSPI) that allows additional units to be daisy chained together, adding as many Satellites as necessary for the battery pack configuration.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e· Capable of measuring up to 18 cells and 3 temperatures (thermistors)\u003c\/li\u003e\n\u003cli\u003e· Can be integrated into multiple satellite systems\u003c\/li\u003e\n\u003cli\u003e· Connected to Master BMS as part of system\u003c\/li\u003e\n\u003cli\u003e· Weatherproof connector and housing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":45255536214100,"sku":"AEM30-8401S","price":301.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/946929ef7dfd8ca2f2c7eef2779530ceL.jpg?v=1775557129"},{"product_id":"aem-ev-tesla-ldu-base-drive-inverter-control-board-harness-must-be-used-with-vcu200","title":"AEM EV Tesla LDU Base Drive Inverter Control Board \u0026 Harness (MUST BE USED WITH VCU200)","description":"\u003cp\u003eAEM EV's Tesla Inverter Control Board acts as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators can program propulsion strategies and characterize inputs through the VCU using AEMcal software. AEM EV's LDU ICB was co-developed with Cascadia Motion, an industry leader in EV propulsion systems, to ensure the highest standards of quality and reliability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e· Full control of torque curves, torque limits, regenerative braking, accelerator pedal response, drive-mode switches, and much more.\u003c\/li\u003e\n\u003cli\u003e· Works with Tesla Model S or Model X Base Large Drive Unit (LDU)\u003c\/li\u003e\n\u003cli\u003e· Must be used with VCU unit\u003c\/li\u003e\n\u003cli\u003e· Unlocks Tesla Drive units\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":45255536803924,"sku":"AEM30-8402","price":1013.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/28541919491de108c542051f907107fcL.jpg?v=1775557130"},{"product_id":"aem-ev-sdu-controller-kit","title":"AEM EV SDU Controller Kit","description":"\u003cp\u003eAEM EV's Tesla Inverter Control Board acts as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators can program propulsion strategies and characterize inputs through the VCU using AEMcal software. AEM EV's SDU ICB was co-developed with Cascadia Motion, an industry leader in EV propulsion systems, to ensure the highest standards of quality and reliability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAllows for customized control of torque and regenerative braking curves, torque rates, and motor spin direction via CAN to allow for Tesla Small Drive Unit installation in any desired orientation for retrofit applications\u003c\/li\u003e\n\u003cli\u003eAllows control of Tesla Small Drive Units (SDU) in a non-OEM application when paired with an AEM VCU\u003c\/li\u003e\n\u003cli\u003eProgrammable, direct replacement for Tesla SDU inverter control board (ICB)\u003c\/li\u003e\n\u003cli\u003eDeveloped to maintain the highest standards of quality and reliability\u003c\/li\u003e\n\u003cli\u003eSDU board works with both front and rear varients of the Tesla SDU\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":45255537066068,"sku":"AEM30-8403","price":1126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/de24e931ffe7509d063d8b1807c03381L.jpg?v=1775557131"},{"product_id":"aem-ev-ccu-kit","title":"AEM EV CCU Kit","description":"\u003cp\u003eThe AEM EV Combined Charging Unit (CCU) combines both an On-Board Charger (OBC) and a DC-DC Converter (DCDC). The OBC charges the HV Battery Pack by taking 120v or 240v AC energy from the grid, converting it to high voltage DC and charging the high voltage battery in the vehicle. The DC-DC converter takes the high voltage from the battery pack and converts it to low voltage to maintain the charge in the vehicles 12V battery. The DC-DC converter performs the duties that the alternator does in an ICE vehicle. The CCU is fully controlled by the VCU via the CAN bus and the OBC and DC-DC report voltage, current and status information back to the VCU.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe DCDC LV output is rated at 91.5% efficiency at full load with a max continuous DCDC output of 178A @ 14V\u003c\/li\u003e\n\u003cli\u003eCompact design (275mm x 202mm x 68mm =3.8L volume) - 2.5x to 3x smaller than comparable units\u003c\/li\u003e\n\u003cli\u003eLightweight (5.5kg, ~12 pounds) comparable units are typically 18-24 pounds\u003c\/li\u003e\n\u003cli\u003eLiquid cooled and temperature controlled for efficient thermal management\u003c\/li\u003e\n\u003cli\u003eThe HV battery charger is rated at 93.5% efficiency at full load\u003c\/li\u003e\n\u003cli\u003e6.6kw (32 amps) on board charger + 2.5kw DC-DC converter\u003c\/li\u003e\n\u003cli\u003eHigh voltage output over and under voltage protection\u003c\/li\u003e\n\u003cli\u003eHigh and low voltage output short circuit protection\u003c\/li\u003e\n\u003cli\u003eThe CCU has the following protection functions:\u003c\/li\u003e\n\u003cli\u003e350Vdc nominal output and up to 450Vdc max\u003c\/li\u003e\n\u003cli\u003eInput over and under voltage protection\u003c\/li\u003e\n\u003cli\u003ePlug-and-play with AEM's EV controls\u003c\/li\u003e\n\u003cli\u003eOver temperature protection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":45255537623124,"sku":"AEM30-8405","price":2535.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/c281b20199f219db52c7cd247adafc05L.jpg?v=1775557131"},{"product_id":"aem-ev-unsealed-battery-management-system-satellite-module-for-vcu","title":"AEM EV Unsealed Battery Management System Satellite Module for VCU","description":"\u003cp\u003eThe VCU communicates with the BMS via the Master Module and all battery packs need at least one Master unit. The Satellites expand the capability of the Master by an additional 18 cells and 3 thermistors per additional Satellite connected. The Satellite Modules are connected to their Master via a high-speed serial interface (isoSPI) that allows additional units to be daisy chained together, adding as many Satellites as necessary for the battery pack configuration.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUnsealed Satellite Modules allow additional units to be daisy chained together to support numerous battery pack configurations\u003c\/li\u003e\n\u003cli\u003eLow Profile 90 degree connector allows for ease of packaging and service when installed into a sealed battery pack\u003c\/li\u003e\n\u003cli\u003eUnsealed Satellite Modules are connected to their Master via a high-speed serial interface (isoSPI)\u003c\/li\u003e\n\u003cli\u003eUnsealed Satellite Modules allows for custom Battery Packs and integration into a sealed module\u003c\/li\u003e\n\u003cli\u003eUnsealed Satellite modules are Intended for installations into sealed custom battery packs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":45255538212948,"sku":"AEM30-8408","price":224.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/3a30fb8f0982f8ecdcebd02be1e43c3aL.jpg?v=1775557132"},{"product_id":"aem-ev-tesla-sport-large-drive-unit-control-board-for-sport-ldu-swaps-only","title":"AEM EV Tesla Sport Large Drive Unit Control Board (For Sport LDU Swaps Only)","description":"\u003cp\u003eAEM EV's Tesla Inverter Control Board acts as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators can program propulsion strategies and characterize inputs through the VCU using AEMcal software. AEM EV's Sport LDU ICB was co-developed with Cascadia Motion, an industry leader in EV propulsion systems, to ensure the highest standards of quality and reliability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e-Can change motors spin direction via CAN to allow for Tesla Small Drive Unit installation in any desired orientation for retrofit applications.\u003c\/li\u003e\n\u003cli\u003e-Allow customized control of torque and regenerative braking curves, torque rates.\u003c\/li\u003e\n\u003cli\u003e-Allows control of LDU in non-OEM applications, used with AEM VCU.\u003c\/li\u003e\n\u003cli\u003e-Direct Replacement Board.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":45255538573396,"sku":"AEM30-8410","price":967.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/28541919491de108c542051f907107fcL_ffc0695c-51f2-4811-8bf7-e51776dde492.jpg?v=1775557133"},{"product_id":"aem-ev-contactor-350a-900v","title":"AEM EV Contactor 350A\/900V","description":"\u003cp\u003eHermetically sealed with gas fill. Integrated coil economizer to reduce coil holding power. Meets RoHS 2011\/65\/EU.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntegrated coil economizer to reduce coil holding power\u003c\/li\u003e\n\u003cli\u003eHermetic seal with gas fill\u003c\/li\u003e\n\u003cli\u003eIEC60947-4-1 compliant\u003c\/li\u003e\n\u003cli\u003eMeets RoHS 2011\/65\/EU\u003c\/li\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":45255539064916,"sku":"AEM30-8503","price":145.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/9ac264adee910f4bf34dbdda1a45d23fL.jpg?v=1775557133"},{"product_id":"aem-ev-600a-hv-maintenance-switch","title":"AEM EV 600A HV Maintenance Switch","description":"\u003cp\u003eHermetically sealed and gas filled. Intrinsically safe with industry leading dielectric performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDrop-in replacement for GIGAVAC1 HBD Series battery disconnect switches\u003c\/li\u003e\n\u003cli\u003eDesigned for OSHA compliant lockout\/tagout (LOTO)\u003c\/li\u003e\n\u003cli\u003eIndustry leading dielectric withstand voltage\u003c\/li\u003e\n\u003cli\u003eUltra-low contact resistance over life\u003c\/li\u003e\n\u003cli\u003eOptional integrated auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eRobust metal-ceramic hermetic seal\u003c\/li\u003e\n\u003cli\u003eHigh temperature performance\u003c\/li\u003e\n\u003cli\u003eReady for harsh environments\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":45255539621972,"sku":"AEM30-8505","price":197.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/9753d8457ed3cad12611d3f7e1b06e9cL.jpg?v=1775557134"},{"product_id":"aem-ev-400a-hv-maintenance-switch","title":"AEM EV 400A HV Maintenance Switch","description":"\u003cp\u003eHermetically sealed and gas filled. Intrinsically safe with industry leading dielectric performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDrop-in replacement for GIGAVAC1 HBD Series battery disconnect switches\u003c\/li\u003e\n\u003cli\u003eDesigned for OSHA compliant lockout\/tagout (LOTO)\u003c\/li\u003e\n\u003cli\u003eIndustry leading dielectric withstand voltage\u003c\/li\u003e\n\u003cli\u003eUltra-low contact resistance over life\u003c\/li\u003e\n\u003cli\u003eOptional integrated auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eRobust metal-ceramic hermetic seal\u003c\/li\u003e\n\u003cli\u003eHigh temperature performance\u003c\/li\u003e\n\u003cli\u003eReady for harsh environments\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":45255540080724,"sku":"AEM30-8506","price":184.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/9f15b0c1433b5e4700282c7a541702daL.jpg?v=1775557135"},{"product_id":"aem-ev-unsealed-bms-satellite-installation-kit","title":"AEM EV Unsealed BMS Satellite Installation Kit","description":"\u003cp\u003eSupplied with PCB Connector, Terminals and Wiring leads\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e· Included 2 x 10’ Milspec Iso leads\u003c\/li\u003e\n\u003cli\u003e· Included 25 x 36” Tap leads\u003c\/li\u003e\n\u003cli\u003e· Included PCB connector\u003c\/li\u003e\n\u003cli\u003e· Save time crimping\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":46912965574740,"sku":"AEM30-3717","price":193.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/06931f5b4fd2bc872ac60764a97e2f7fL.jpg?v=1780029104"},{"product_id":"aem-ev-1000a-shunt-current-sensors","title":"AEM EV 1000A Shunt Current Sensors","description":"\u003cp\u003eOverall, the Isabellenhutte IVT-S-1K-U3-I-CAN2-12\/24 is a versatile and reliable current sensor that is ideal for automotive EV applications. Its high accuracy, digital output, and rugged construction make it an excellent choice for demanding environments where precision and reliability are essential.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMonitor battery stack voltage, intermediate circuit voltage, and relay functions\u003c\/li\u003e\n\u003cli\u003eCan be used on the high or low side of the battery\u003c\/li\u003e\n\u003cli\u003eTemperature compensation and calibration\u003c\/li\u003e\n\u003cli\u003eInternally verified current measurement\u003c\/li\u003e\n\u003cli\u003eGalvanic isolation of 1000VDC\u003c\/li\u003e\n\u003cli\u003eCANbus 2.0a interface\u003c\/li\u003e\n\u003cli\u003eHighly accurate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":46912965738580,"sku":"AEM30-8500","price":322.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/bd23fd2c7210adc7591a4af4bf6f998eL.jpg?v=1780029105"},{"product_id":"aem-ev-2500a-shunt-current-sensors","title":"AEM EV 2500A Shunt Current Sensors","description":"\u003cp\u003eOverall, the Isabellenhutte IVT-S-2K5-U3-I-CAN2-12\/24 is a versatile and reliable current sensor that is ideal for automotive EV applications. Its high accuracy, digital output, and rugged construction make it an excellent choice for demanding environments where precision and reliability are essential.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMonitor battery stack voltage, intermediate circuit voltage, and relay functions\u003c\/li\u003e\n\u003cli\u003eCan be used on the high or low side of the battery\u003c\/li\u003e\n\u003cli\u003eTemperature compensation and calibration\u003c\/li\u003e\n\u003cli\u003eInternally verified current measurement\u003c\/li\u003e\n\u003cli\u003eGalvanic isolation of 1000VDC\u003c\/li\u003e\n\u003cli\u003eCANbus 2.0a interface\u003c\/li\u003e\n\u003cli\u003eHighly accurate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":46912966852692,"sku":"AEM30-8501","price":332.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/12ebfa6b292b1d7c9dee0846bff6e8d5L.png?v=1780029106"},{"product_id":"aem-ev-contactor-500a-1500v","title":"AEM EV Contactor 500A\/1500V","description":"\u003cp\u003eHermetically sealed with gas fill. Integrated coil economizer to reduce coil holding power. Meets RoHS 2011\/65\/EU.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntegrated coil economizer to reduce coil holding power\u003c\/li\u003e\n\u003cli\u003eAuxiliary contacts - for main position feedback\u003c\/li\u003e\n\u003cli\u003eHermetic seal with gas fill\u003c\/li\u003e\n\u003cli\u003eIEC60947-4-1 compliant\u003c\/li\u003e\n\u003cli\u003eMeets RoHS 2011\/65\/EU\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":46912966918228,"sku":"AEM30-8504","price":250.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/0f311a50c37be05513a9306643a7049dL.jpg?v=1780029107"},{"product_id":"aem-ev-current-sensor-dual-range-75a-750","title":"AEM EV Current Sensor - Dual Range -  +\/-75A\/750","description":"\u003cp\u003eThe AEM Dual Channel Hall-Effect Analog Current Sensor plays a critical role in EV drive systems. It's job is to measure current in and out of the vehicles High Voltage battery pack and report this data back to the VCU to be used for battery current limiting and management as well as energy tracking.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e-Primary current measuring range up to ±75 A for channel 1\u003c\/li\u003e\n\u003cli\u003e-Operating Temperature Range of -40 to 257 Fahrenheit\u003c\/li\u003e\n\u003cli\u003e-Good accuracy for high and low current.\u003c\/li\u003e\n\u003cli\u003e-The inner diameter is 21.55mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":46912966983764,"sku":"AEM30-8509","price":115.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/496301e18687a9a80a3b64c15619eec8L.jpg?v=1780029108"},{"product_id":"aem-ev-current-sensor-dual-range-75a-1000","title":"AEM EV Current Sensor - Dual Range - +\/-75A\/1000","description":"\u003cp\u003eThe AEM Dual Channel Hall-Effect Analog Current Sensor plays a critical role in EV drive systems. It's job is to measure current in and out of the vehicles High Voltage battery pack and report this data back to the VCU to be used for battery current limiting and management as well as energy tracking.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDual Channel range ±75 A for Channel 1 and ±1000 A for Channel 2\u003c\/li\u003e\n\u003cli\u003e-Primary current measuring range up to ±75 A for channel 1.\u003c\/li\u003e\n\u003cli\u003e-Operating Temperature Range of -40 to 257 Fahrenheit.\u003c\/li\u003e\n\u003cli\u003eOperating Temperature Range of -40 to 257 Fahrenheit\u003c\/li\u003e\n\u003cli\u003e-Good accuracy for high and low current.\u003c\/li\u003e\n\u003cli\u003e-The inner diameter is 21.55mm.\u003c\/li\u003e\n\u003cli\u003eUnipolar +5 V DC Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":46912967049300,"sku":"AEM30-8510","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/130867ec6b1724da7e08aada62fd6993L.jpg?v=1780029109"},{"product_id":"aem-vcu-300-lv-front-harness","title":"AEM VCU 300 LV Front Harness","description":"\u003cp\u003eThis low voltage harness assembly was designed to be installed in the front half of the electric vehicle. It was designed to be used with a mating rear half assembly that is VCU hardware specific. The AEM part number for the mating rear half harness is 30-8601.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e-Flying Leads for VCU300 power, Wake Switch, Accelerator Pedal, Brake Switch and Heater.\u003c\/li\u003e\n\u003cli\u003e-Label with color coded wires.\u003c\/li\u003e\n\u003cli\u003e-Prewired communications port.\u003c\/li\u003e\n\u003cli\u003e-Braided harness.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":46912967114836,"sku":"AEM30-8603","price":898.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/5b157403c0e1777c3073955cd73667f1L.jpg?v=1780029110"},{"product_id":"aem-ev-vcu-275-lv-front-harness","title":"AEM EV VCU 275 LV Front Harness","description":"\u003cp\u003eThis low voltage harness assembly was designed to be installed in the front half of the electric vehicle. It was designed to be used with a mating rear half assembly that is VCU hardware specific. The AEM part number for the mating rear half harness is 30-8601.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e-Flying Leads for VCU275 power, Wake Switch, Accelerator Pedal, Brake Switch and Heater.\u003c\/li\u003e\n\u003cli\u003e-Prewired communications port.\u003c\/li\u003e\n\u003cli\u003e-Label and color-coded wires.\u003c\/li\u003e\n\u003cli\u003e-Braided harness.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":46912967180372,"sku":"AEM30-8604","price":967.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/2450\/3636\/files\/76abcfb61ec3151461aa36ae7872f6bbL.jpg?v=1780029110"}],"url":"https:\/\/machyetiracing.com\/collections\/ev-controllers.oembed","provider":"Mach Yeti Racing","version":"1.0","type":"link"}